For the current REF see the REF 2021 website REF 2021 logo
You are in : Home » Results & submissions » Select UOA » 12 - Aeronautical, Mechanical, Chemical and Manufacturing Engineering » View submission: University of Bath » Outputs

Outputs (REF2)

12 - Aeronautical, Mechanical, Chemical and Manufacturing Engineering

University of Bath

1 2 3 4 5
> Last
Showing outputs 1 - 50 of 210
Output title
A computer model of the artificially ventilated human respiratory ...
Output type
D - Journal article
Volume title
Medical Engineering & Physics
Year
2009
DOI
10.1016/j.medengphy.2009.07.009
Output title
A detailed dynamic model of a six-axis shaking table
Output type
D - Journal article
Volume title
Journal of Earthquake Engineering
Year
2008
DOI
10.1080/13632460701457264
Output title
A direct method of adaptive FIR input shaping for motion control ...
Output type
D - Journal article
Volume title
IEEE - ASME Transactions on Mechatronics
Year
2013
DOI
10.1109/TMECH.2011.2174373
Output title
A discrete-time approach to impulse-based adaptive input shaping ...
Output type
D - Journal article
Volume title
Automatica
Year
2011
DOI
10.1016/j.automatica.2011.08.039
Output title
A general co-ordinate transformation framework for multi-axis ...
Output type
D - Journal article
Volume title
Control Engineering Practice
Year
2010
DOI
10.1016/j.conengprac.2010.02.015
Output title
A methodology for the determination of foamed polymer contraction ...
Output type
D - Journal article
Volume title
Robotics and Computer-Integrated Manufacturing
Year
2010
DOI
10.1016/j.rcim.2010.08.003
Output title
A model from first principles of the radial heat flux in a cylinder ...
Output type
D - Journal article
Volume title
Journal of Thermal Science and Engineering Applications
Year
2009
DOI
10.1115/1.4000583
Output title
A multiobjective adaptive controller for magnetic bearing sy ...
Output type
D - Journal article
Volume title
Journal of Engineering for Gas Turbines and Power: Transactions of the ASME
Year
2010
DOI
10.1115/1.4001060
Output title
A new hole insertion method for level set based structural topology ...
Output type
D - Journal article
Volume title
International Journal for Numerical Methods in Engineering
Year
2013
DOI
10.1002/nme.4384
Output title
A novel closed-loop electromechanical stimulator to enhance osseointegration ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine
Year
2010
DOI
10.1243/09544119jeim686
Output title
A novel methodology for cross-technology interoperability in ...
Output type
D - Journal article
Volume title
Robotics and Computer-Integrated Manufacturing
Year
2013
DOI
10.1016/j.rcim.2012.04.016
Output title
A novel piezohydraulic aerospace servovalve. Part I: design and ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
Year
2013
DOI
10.1177/0959651813478288
Output title
A polymer of intrinsic microporosity as the active binder to ...
Output type
D - Journal article
Volume title
Microporous and Mesoporous Materials
Year
2013
DOI
10.1016/j.micromeso.2012.11.039
Output title
A refined one-filtration method for aqueous based nanofiltration ...
Output type
D - Journal article
Volume title
Journal of Membrane Science
Year
2011
DOI
10.1016/j.memsci.2011.08.023
Output title
A scanning fluid dynamic gauging technique for probing surface ...
Output type
D - Journal article
Volume title
Measurement Science & Technology
Year
2010
DOI
10.1088/0957-0233/21/8/085103
Output title
A strategy to determine operating parameters in tissue engineering ...
Output type
D - Journal article
Volume title
Biotechnology and Bioengineering
Year
2011
DOI
10.1002/bit.23062
Output title
A theoretical approach to zonation in a bioartificial liver
Output type
D - Journal article
Volume title
Biotechnology and Bioengineering
Year
2012
DOI
10.1002/bit.23279
Output title
A unified manufacturing resource model for representation of ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Year
2009
DOI
10.1243/09544054jem1363
Output title
A unified manufacturing resource model for representing CNC machining ...
Output type
D - Journal article
Volume title
Robotics and Computer-Integrated Manufacturing
Year
2009
DOI
10.1016/j.rcim.2009.04.014
Output title
Accurate heat transfer measurements using thermochromic liquid ...
Output type
D - Journal article
Volume title
International Journal of Heat and Fluid Flow
Year
2009
DOI
10.1016/j.ijheatfluidflow.2009.04.007
Output title
Active control of pressure pulsation in a switched inertance ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
Year
2013
DOI
10.1177/0959651813490096
Output title
Adiabatic shear band formation as a result of cryogenic CNC machining ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Year
2011
DOI
10.1177/0954405411415318
Output title
Aeroacoustic sources of motorcycle helmet noise
Output type
D - Journal article
Volume title
The Journal of the Acoustical Society of America
Year
2011
DOI
10.1121/1.3621097
Output title
Aerothermal investigations of tip leakage flow in axial flow ...
Output type
D - Journal article
Volume title
Journal of Turbomachinery: Transactions of the ASME
Year
2009
DOI
10.1115/1.2950060
Output title
Alongshore fluid motions in the swash zone of a sandy and gravel ...
Output type
D - Journal article
Volume title
Coastal Engineering
Year
2011
DOI
10.1016/j.coastaleng.2011.03.004
Output title
An active auxiliary bearing control strategy to reduce the onset ...
Output type
D - Journal article
Volume title
Journal of Engineering for Gas Turbines and Power: Transactions of the ASME
Year
2010
DOI
10.1115/1.3204644
Output title
An adaptive multi-objective controller for flexible rotor and ...
Output type
D - Journal article
Volume title
Journal of Dynamic Systems Measurement and Control - Transactions of the ASME
Year
2011
DOI
10.1115/1.4003421
Output title
An analysis and design framework for robust control of a multi-axis ...
Output type
D - Journal article
Volume title
Journal of Vibration and Control
Year
2013
DOI
10.1177/1077546313494099
Output title
An analytical study of the pulsed thermography defect detection ...
Output type
D - Journal article
Volume title
Journal of Applied Physics
Year
2012
DOI
10.1063/1.4704684
Output title
An empirical approach to predicting heat transfer within single- ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Year
2011
DOI
10.1177/0954407010397464
Output title
An empirical model for the carbon dioxide emissions of a diesel ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Year
2012
DOI
10.1177/0954407012444524
Output title
An experimental and modelling investigation of the effect of ...
Output type
D - Journal article
Volume title
Applied Catalysis B: Environmental
Year
2011
DOI
10.1016/j.apcatb.2011.08.008
Output title
An experimental investigation into the pre-treatment of synthetic ...
Output type
D - Journal article
Volume title
Journal of Food Engineering
Year
2011
DOI
10.1016/j.jfoodeng.2011.02.015
Output title
An in vitro study of electrically active hydroxyapatite-barium ...
Output type
D - Journal article
Volume title
Journal of Materials Science: Materials in Medicine
Year
2009
DOI
10.1007/s10856-009-3734-0
Output title
An intelligent approach for the prediction of surface roughness ...
Output type
D - Journal article
Volume title
Robotics and Computer-Integrated Manufacturing
Year
2008
DOI
10.1016/j.rcim.2008.03.019
Output title
Analysis of cyclic variability in combustion in internal combustion ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Year
2011
DOI
10.1177/09544070JAUTO1723
Output title
Analysis of hydrogen storage in nanoporous materials for low ...
Output type
D - Journal article
Volume title
Faraday Discussions
Year
2011
DOI
10.1039/c0fd00010h
Output title
Analysis of optimal conditions for adsorptive hydrogen storage ...
Output type
D - Journal article
Volume title
Colloids and Surfaces, A: Physicochemical and Engineering Aspects
Year
2013
DOI
10.1016/j.colsurfa.2012.11.008
Output title
Application of a methodology to assess the performance of a full-scale ...
Output type
D - Journal article
Volume title
Chemical Engineering Research & Design
Year
2013
DOI
10.1016/j.cherd.2013.02.022
Output title
Application of fluid dynamic gauging to annular test apparatuses ...
Output type
D - Journal article
Volume title
Experimental Thermal and Fluid Science
Year
2011
DOI
10.1016/j.expthermflusci.2010.12.002
Output title
Atlas of spherical four-bar mechanisms
Output type
D - Journal article
Volume title
Mechanism and Machine Theory
Year
2011
DOI
10.1016/j.mechmachtheory.2011.06.001
Output title
Baseline-free estimation of residual fatigue life using a third ...
Output type
D - Journal article
Volume title
Journal of the Acoustical Society of America
Year
2011
DOI
10.1121/1.3621714
Output title
Bending strength of delaminated aerospace composites
Output type
D - Journal article
Volume title
Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences
Year
2012
DOI
10.1098/rsta.2011.0337
Output title
Bifurcating flows of plunging airfoils at high Strouhal numb ...
Output type
D - Journal article
Volume title
Journal of Fluid Mechanics
Year
2012
DOI
10.1017/jfm.2012.314
Output title
Biochemical and biomechanical gradients for directed bone marrow ...
Output type
D - Journal article
Volume title
Biomaterials
Year
2010
DOI
10.1016/j.biomaterials.2010.06.046
Output title
Bubble size measurements in breaking waves using optical fiber ...
Output type
D - Journal article
Volume title
IEEE Journal of Oceanic Engineering
Year
2010
DOI
10.1109/JOE.2010.2044940
Output title
Catalyst ‘light-off’ experiments on a diesel oxidation catalyst ...
Output type
D - Journal article
Volume title
Chemical Engineering Research & Design
Year
2012
DOI
10.1016/j.cherd.2011.10.003
Output title
Causal inversion of non-minimum-phase systems for hardware-in-the-loop ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
Year
2013
DOI
10.1177/0959651812467880
Output title
CFD analysis of flow and heat transfer in a direct transfer preswirl ...
Output type
D - Journal article
Volume title
Journal of Turbomachinery: Transactions of the ASME
Year
2012
DOI
10.1115/1.4003229
Output title
Characterization of crude oils and their fouling deposits using ...
Output type
D - Journal article
Volume title
Heat Transfer Engineering
Year
2011
DOI
10.1080/01457632.2010.495603
1 2 3 4 5
> Last
Showing outputs 1 - 50 of 210