For the current REF see the REF 2021 website REF 2021 logo
You are in : Home » Results & submissions » Select UOA » 15 - General Engineering » View submission: University of Huddersfield » Outputs

Outputs (REF2)

15 - General Engineering

University of Huddersfield

1 2 3
> Last
Showing outputs 1 - 50 of 121
Output title
A computational fluid dynamic analysis on the effect of front ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Year
2008
DOI
10.1243/09544070JAUTO755
Output title
A Generalised Linear and Nonlinear Spline filter
Output type
D - Journal article
Volume title
Wear
Year
2011
DOI
10.1016/j.wear.2010.04.010
Output title
A Low-cost Ultrasonic 3D Measurement Device for Calibration for ...
Output type
D - Journal article
Volume title
Journal of the Japanese Society of Experimental Mechanics
Year
2009
DOI
Output title
A method and an apparatus for processing a signal
Output type
F - Patent/published patent application
Volume title
Year
2010
DOI
Output title
A method and an apparatus for processing an audio signal
Output type
F - Patent/published patent application
Volume title
Year
2009
DOI
Output title
A new method for determining wheel–rail multi-point contact
Output type
D - Journal article
Volume title
Vehicle System Dynamics
Year
2011
DOI
10.1080/00423114.2010.539237
Output title
A Novel Delta-Sigma Control System Processor and Its VLSI Im ...
Output type
D - Journal article
Volume title
IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Year
2008
DOI
10.1109/TVLSI.2007.915396
Output title
A Portable Wideband Impulsive Noise Location System
Output type
D - Journal article
Volume title
IEEE Transactions on Instrumentation and Measurement
Year
2008
DOI
10.1109/tim.2008.917258
Output title
A Practical Coordinate Unification Method for Integrated Tactile-Optical ...
Output type
D - Journal article
Volume title
Optics and lasers in engineering
Year
2013
DOI
10.1016/j.optlaseng.2013.11.004
Output title
A simple, flexible and automatic 3D calibration method for a ...
Output type
D - Journal article
Volume title
Optics Express
Year
2013
DOI
10.1364/OE.21.012218
Output title
A structural study of an innovative steel–concrete track str ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Year
2010
DOI
10.1243/09544097JRRT340
Output title
Acoustic monitoring of engine fuel injection based on adaptive ...
Output type
D - Journal article
Volume title
Applied Acoustics
Year
2010
DOI
10.1016/j.apacoust.2010.07.001
Output title
Active Vibration Control for a CNC Milling Machine
Output type
D - Journal article
Volume title
Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science
Year
2013
DOI
10.1177/0954406213484224
Output title
Actively stabilized optical fiber interferometry technique for ...
Output type
D - Journal article
Volume title
Review of scientific instruments
Year
2008
DOI
10.1063/1.2870085
Output title
Adhesion estimation at the wheel–rail interface using advanced ...
Output type
D - Journal article
Volume title
Vehicle System Dynamics
Year
2012
DOI
10.1080/00423114.2012.707782
Output title
An Advanced SOM Algorithm Applied to Handover Management within ...
Output type
D - Journal article
Volume title
IEEE Transactions on Vehicular Technology
Year
2013
DOI
10.1109/TVT.2013.2251922
Output title
An apparatus for processing an audio signal and method there ...
Output type
F - Patent/published patent application
Volume title
Year
2010
DOI
Output title
An Application to Transient Current Signal based Induction Motor ...
Output type
D - Journal article
Volume title
Expert Systems With Applications
Year
2013
DOI
10.1016/j.eswa.2013.03.040
Output title
An investigation of sleeper voids using a flexible track model ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Year
2009
DOI
10.1243/09544097JRRT276
Output title
An optimization study of a multiple-row pin-vented brake disc ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Year
2009
DOI
10.1243/09544070JAUTO1053
Output title
Analysis of discrete time schemes for milling forces control ...
Output type
D - Journal article
Volume title
International Journal of Precision Engineering and Manufacturing
Year
2013
DOI
10.1007/s12541-013-0097-8
Output title
Apparatus and Method for Controlling a Multi-fuel Engine
Output type
F - Patent/published patent application
Volume title
Year
2010
DOI
Output title
Application of power spectrum, cepstrum, higher order spectrum ...
Output type
D - Journal article
Volume title
Mechanical Systems and Signal Processing
Year
2013
DOI
10.1016/j.ymssp.2013.02.016
Output title
Assessing the accuracy of different simplified frictional rolling ...
Output type
D - Journal article
Volume title
Vehicle System Dynamics
Year
2012
DOI
10.1080/00423114.2011.552618
Output title
Atomic force microscope cantilever as an encoding sensor for ...
Output type
D - Journal article
Volume title
Measurement Science and Technology
Year
2010
DOI
10.1088/0957-0233/21/10/105205
Output title
Atomic force microscope cantilevers as encoders for real-time ...
Output type
D - Journal article
Volume title
Measurement Science and Technology
Year
2011
DOI
10.1088/0957-0233/22/9/094017
Output title
Automatic planning for machine tool calibration: A case stud ...
Output type
D - Journal article
Volume title
Expert Systems with Applications
Year
2012
DOI
10.1016/j.eswa.2012.03.054
Output title
Bending buckling of single-walled carbon nanotubes by atomic-scale ...
Output type
D - Journal article
Volume title
Composites Part B: Engineering
Year
2008
DOI
10.1016/j.compositesb.2007.02.025
Output title
Carbody tilting – technologies and benefits
Output type
D - Journal article
Volume title
Vehicle System Dynamics
Year
2009
DOI
10.1080/00423110903082234
Output title
Combustion and Performance Characteristics of CI Engine Running ...
Output type
D - Journal article
Volume title
Energy
Year
2013
DOI
10.1016/j.energy.2013.01.010
Output title
Comparison of Type F2 Software Measurement Standards for Surface ...
Output type
N - Research report for external body
Volume title
Year
2009
DOI
Output title
Comparison of Volumetric Analysis Methods for Machine Tools with ...
Output type
E - Conference contribution
Volume title
Laser Metrology and Machine Performance
Year
2009
DOI
Output title
Comparison of wheel-rail contact codes for railway vehicle simulation: ...
Output type
D - Journal article
Volume title
Vehicle System Dynamics
Year
2008
DOI
10.1080/00423110701790749
Output title
Comparison study of algorithms and accuracy in the wavelength ...
Output type
D - Journal article
Volume title
Applied Optics
Year
2012
DOI
10.1364/AO.51.008854
Output title
Control Engineering Challenges for Railway Trains of the Fut ...
Output type
D - Journal article
Volume title
Measurement and Control
Year
2011
DOI
10.1177/002029401104400102
Output title
Defining and Computing Machine Tool Accuracy
Output type
E - Conference contribution
Volume title
Laser Metrology and Machine Performance
Year
2009
DOI
Output title
Defining True Tribological Contact Through Application of the ...
Output type
D - Journal article
Volume title
Tribology Letters
Year
2013
DOI
10.1007/s11249-013-0111-4
Output title
Design and test of a Pareto optimal flat pad aerostatic bear ...
Output type
D - Journal article
Volume title
Tribology International
Year
2008
DOI
10.1016/j.triboint.2007.07.011
Output title
Detecting the crankshaft torsional vibration of diesel engines ...
Output type
D - Journal article
Volume title
Journal of Sound and Vibration
Year
2009
DOI
10.1016/j.jsv.2008.10.024
Output title
Development and Validation of a Wheel Wear and Rolling Contact ...
Output type
D - Journal article
Volume title
Wear
Year
2013
DOI
10.1016/j.wear.2013.08.004
Output title
Diesel engine fuel injection monitoring using acoustic measurements ...
Output type
D - Journal article
Volume title
Measurement
Year
2010
DOI
10.1016/j.measurement.2010.08.003
Output title
Dimensional metrology of micro parts by optical three-dimensional ...
Output type
D - Journal article
Volume title
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Year
2012
DOI
10.1177/0954405412461240
Output title
Dispersed reference interferometry
Output type
D - Journal article
Volume title
CIRP Annals - Manufacturing Technology
Year
2013
DOI
10.1016/j.cirp.2013.03.104
Output title
Efficient estimation by FEA of machine tool distortion due to ...
Output type
D - Journal article
Volume title
Precision Engineering
Year
2013
DOI
10.1016/j.precisioneng.2012.10.006
Output title
Efficient thermal error prediction in a machine tool using finite ...
Output type
D - Journal article
Volume title
Measurement Science and Technology
Year
2011
DOI
10.1088/0957-0233/22/8/085107
Output title
Electrical motor current signal analysis using a modified bispectrum ...
Output type
D - Journal article
Volume title
Mechanical Systems and Signal Processing
Year
2011
DOI
10.1016/j.ymssp.2010.07.004
Output title
Estimation of Impulsive Noise in an Electricity Substation
Output type
D - Journal article
Volume title
IEEE Transactions on Electromagnetic Compatibility
Year
2011
DOI
10.1109/TEMC.2010.2092782
Output title
Experimental and theoretical study of the gas–water two phase ...
Output type
D - Journal article
Volume title
Nuclear Engineering and Design
Year
2011
DOI
10.1016/j.nucengdes.2010.09.006
Output title
Experimental verification of the power spectral density of dicode ...
Output type
D - Journal article
Volume title
IET Optoelectronics
Year
2011
DOI
10.1049/iet-opt.2009.0054
Output title
Fast algorithm of the Robust Gaussian Regression Filter for Areal ...
Output type
D - Journal article
Volume title
Measurement Science and Technology
Year
2010
DOI
10.1088/0957-0233/21/5/055108
1 2 3
> Last
Showing outputs 1 - 50 of 121